It has been a while since I posted a builders update so here is my latest accomplishment.
The installation of the footwell floor completes the construction of the aft cockpit area, Its now ready for filleting and glassing.
I left the footwell floor install till last to provide easy access running the wiring through the 25mm conduits that ran under the floorboards through BH8 into the foam buoyancy area and through to the junction boxes in the lazarettes. Using a Forstner bit I drilled the drainage holes for the aft storage areas and the transom. Now the area is ready for filleting and glassing.
Check out the progress on my blog.
https://hookypocketship.blogspot.comCheers Terry from down under.