I'm thinking about filling the bow area with spray cans of foam. It looks like it would be much easier than cutting all those pieces of foam. Is there any reason not to use this foam?
ROGER
PocketShip.net
For sailors and boatbuilders interested in PocketShip
BOW FLOWTATION
Moderator: John C. Harris
Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.
3 posts • Page 1 of 1
BOW FLOWTATION
by Jollyroger on Sat Dec 05, 2009 4:56 pm
- Jollyroger
- Posts: 20
- Joined: Thu Feb 05, 2009 8:40 pm
Re: BOW FLOWTATION
by SHyland83 on Sat Dec 05, 2009 5:13 pm
You should read the first 2 pages of the thread titles "Jeff's pocketship progress". He used 2 part pour in expanding foam made for this application. Look at his pictures he did an excellent job with it. And be sure to read John's post at the top of the second page discussing possible problems with the expanding foam.
- SHyland83
- Posts: 58
- Joined: Thu Feb 05, 2009 6:23 pm
- Location: Oakdale, NY
Re: BOW FLOWTATION
by Jollyroger on Tue Dec 08, 2009 9:53 pm
Just finished putting flotation in the bow. Used two pieces of 1 1/2 inch pink foam board to form the opening in the center of the area. Then used eight cans of spray foam to fill the rest of the area. I'm happy with the way it turned out.
ROGER
ROGER
- Jollyroger
- Posts: 20
- Joined: Thu Feb 05, 2009 8:40 pm
3 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 257 guests