Re: PocketShip Anchor Storage
Posted: Sat Jun 17, 2023 4:08 am- IMG_0943.jpeg (22.3 KiB) Viewed 689 times
- IMG_0965.jpeg (22.61 KiB) Viewed 689 times
G’Day Bill,
I elected to build an anchor locker in the space between the stem and BH1. The space is large enough for the rope, 15’ of chain and a small sand anchor. if weight distribution is an issue I can remove the chain and store under the floorboards next to the CB case and relocate the sand anchor to the lazaret. If a larger anchor is required It can be stored on the foredeck.
The space did reduce the foam buoyancy by around a quarter however I made the locker with a sealed lid and a plug in the drain hole so it still provides buoyancy as an air chamber and can be aired out when not sailing, at anchor or in storage. I also re-located the round deck hatch in BH1 for bow eye access to the base of the anchor locker.
Check out the September 2022 post on my Blog for the anchor storage locker mod.
Cheers mate Terry from down under
https://hookypocketship.blogspot.com