Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.
This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.
We'll try to knock down spam as quickly as possible.
I'm about half way through building my PocketShip and have this large roll of fiberglass tape. Used about 5 feet in the bow and that is about it. Did I get extra tape or did I miss something along the way?
The manual shows it being used to reinforce the joint between the seats and aft cabin bulkhead and also the joint between the upper and lower hull sides.
I didn't remember putting tape between the seat and bulkhead,thanks for reminding me. Must have missed where it said to tape the hull sides together. Thanks again for the help.