Has anyone tried the West System graphite/epoxy mix for the bottom of the keel? I'm planning on doing the bottom three inches or so where it drags onto the trailer for wear resistance. Any thoughts?
Chris
PocketShip.net
For sailors and boatbuilders interested in PocketShip
graphite mix on keel
Moderator: John C. Harris
Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.
2 posts • Page 1 of 1
graphite mix on keel
by chaertl on Wed Aug 24, 2011 9:40 pm
- chaertl
- Posts: 133
- Joined: Sun Jun 13, 2010 8:40 pm
- Location: Minnesota
Re: graphite mix on keel
by tattoo on Wed Sep 21, 2011 11:51 am
Didn't use graphite mix, but installed 3/4" half oval on the keel. It slides very well on the bare wood of the centerline bunk. I have applied grease and bee's wax to the bare wood.
Pete McCrary, launched Tattoo Oct '10.
- tattoo
- Posts: 116
- Joined: Wed Sep 16, 2009 7:09 pm
- Location: Manassas, Virginia, USA
2 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 101 guests