the template for milling the fingers on the connection plywo

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.

the template for milling the fingers on the connection plywo

Postby hood on Fri Jul 11, 2014 4:36 pm

the template for milling the fingers on the connection plywoods
Attachments
0166.JPG
0166.JPG (183.8 KiB) Viewed 2878 times
0165.JPG
0165.JPG (215.23 KiB) Viewed 2872 times
0164.JPG
0164.JPG (147.06 KiB) Viewed 2844 times
hood
 
Posts: 34
Joined: Sat May 12, 2012 2:31 pm

Re: the template for milling the fingers on the connection plywo

Postby craig on Fri Jul 11, 2014 6:33 pm

Did you make that or buy it? If bought, where from? Dana posted a link a while back but the website never worked. This would make scarf joints MUCH easier to do. The Pocketship manual says they are not as scary as their reputation, but so far it was the most challenging part of the build for me. I would love one of these...
Titania, launched January 2015
craig
 
Posts: 284
Joined: Fri Feb 21, 2014 1:04 pm
Location: Chapel Hill, NC

Re: the template for milling the fingers on the connection plywo

Postby hood on Fri Jul 11, 2014 11:41 pm

the template is excised by laser from sheet steel 4 mm. the fingers are 15 mm wide
Attachments
0179.JPG
0179.JPG (159.26 KiB) Viewed 2809 times
0170.JPG
0170.JPG (163.09 KiB) Viewed 2811 times
0168.JPG
0168.JPG (168.41 KiB) Viewed 2814 times
hood
 
Posts: 34
Joined: Sat May 12, 2012 2:31 pm

Re: the template for milling the fingers on the connection plywo

Postby DanaDCole on Wed Jul 16, 2014 11:54 am

Well if you made those things I'll bet you could make more and sell them to boat builders (and not just PocketShip builders).
DanaDCole
 
Posts: 497
Joined: Wed Sep 25, 2013 2:06 pm
Location: Stillwater, Oklahoma


Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 66 guests