Page 1 of 1
Interluxe 33...primer first?
Posted:
Sat Aug 01, 2015 9:24 pm
by bcollins1234
Hey,
I see the build manual states that interlux 33 is applied directly to the expoxy/glass, but shouldn't there be a primer? Just nervous. I'm about the start my hull painting and want to get it right.
Bob
Re: Interluxe 33...primer first?
Posted:
Mon Aug 03, 2015 10:28 am
by Shudoman
Nope... No primer. This stuff holds great on fiberglass. I sanded the bottom down to #220 and then cleaned with the recommended proprietary cleaner (it tells you on the can) and then rolled the stuff on. Two coats looked ok, 3 was much better.
Bill
Re: Interluxe 33...primer first?
Posted:
Mon Aug 03, 2015 9:15 pm
by bcollins1234
Cheers! Thank you for the reply.
Re: Interluxe 33...primer first?
Posted:
Tue Aug 11, 2015 9:16 pm
by craig
What kind of coverage can you get from this stuff? Is one quart enough for the bottom?
Re: Interluxe 33...primer first?
Posted:
Wed Aug 12, 2015 11:22 am
by Shudoman
I bought 2 quarts... One didn't cover it at the thickness that the specs call for. I didn't use all of the 2nd quart. You might be able to get by buying a quart and a pint.