Thanks Jimmy! I was just looking at the same website and found the 50 degree's minimum. I might have to wait till the temperatures warm up a little.
I live down the street in Richmond VA and it was about the same temperature this morning. I have been using the tent idea on the boat applying some epoxy to the cleats and that worked pretty good. I found a large roll of plastic on Amazon and with a single work light I could keep it above 50 degrees. I just laid 2 2x4s across the boat and used the clamps to hold the plastic in place. I need to put another coat on the cleats before sanding them.
I have plenty of other work to keep me busy, mainly "SANDING".
I also still need to sand the floor boards with 120 before I can even apply the oil.
I worked about 3 hours yesterday sanding the interior and plan on more today.
Thanks
Ron