Wet Okoume

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.

Wet Okoume

Postby jwv630 on Mon Sep 24, 2018 10:43 am

Hi Guys

Have been storing my Okoume plywood in a shed under a waterproof tarp. The shed’s roof developed a big hole and some of the plywood is real wet; some soaked thru i spots. It’s probably been in that condition fot at least a week. Concerned about dry rot after it drys out and/or that the wood will never be full strength.

Thinking of bringing the wood into my home to dry it out and srore it. Maybe put a heat lamp on the worst spots to expidite drying...?

Do you think the wood is salvagable? Ideas, opinions, concerns much appreciated.

Jimmy V
‘Miss Jen’
jwv630
 
Posts: 127
Joined: Sun Nov 22, 2009 4:12 pm

Re: Wet Okoume

Postby riverron on Mon Sep 24, 2018 12:22 pm

Jimmy,
I am not a plywood expert, so you may want to talk to the guys at CLC.
I would fix the issue with how it is getting wet and bringing it inside if you have the room.
I am not sure I would try to force the drying process, but let it dry naturally.

Are these the CNC cut pieces or full sheets of uncut plywood?

thanks
riverron
 
Posts: 165
Joined: Fri Aug 07, 2015 10:29 am
Location: Richmond Virginia

Re: Wet Okoume

Postby jwv630 on Mon Sep 24, 2018 6:17 pm

Hi Ron

Thanks. Yes, I'll call CLC tomorrow; yes, the wet pieces are the one's included in the kit from CLC.

Jimmy
jwv630
 
Posts: 127
Joined: Sun Nov 22, 2009 4:12 pm


Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 4 guests

cron