glassing the rub rails

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.

glassing the rub rails

Postby buckeye on Tue Sep 08, 2020 11:46 am

Did you glass the rub rail and tabernacle?
I'm assuming yes on both but would like to hear from the group.

Operating under the assumption that every square inch of exposed material will be sheathed if at all possible.
Spars being the apparent exception but I wonder about that as well.

Thanks.
buckeye
 
Posts: 5
Joined: Mon Aug 31, 2020 1:25 pm

Re: glassing the rub rails

Postby riverron on Tue Sep 08, 2020 7:57 pm

I didn’t glass the rub rails, but they got lots of epoxy and varnish! I did glass the tabernacle.

Thanks
riverron
 
Posts: 240
Joined: Fri Aug 07, 2015 10:29 am
Location: Richmond Virginia

Re: glassing the rub rails

Postby Mflyer65 on Wed Sep 09, 2020 1:24 pm

I did not glass the rub rails or tabernacle on my boat.
Mike
Mflyer65
 
Posts: 49
Joined: Thu Nov 15, 2018 12:09 pm
Location: Durham, NC

Re: glassing the rub rails

Postby JonLee on Wed Sep 16, 2020 11:14 pm

No fiberglass on the rubrails, but it is worthwhile to coat them in epoxy.
JonLee
 
Posts: 163
Joined: Tue Oct 19, 2010 10:02 am

Re: glassing the rub rails

Postby JonLee on Wed Sep 16, 2020 11:21 pm

I'll add that I did not do any fiberglassing on my original tabernacle (which I made removable). It got damaged due to a large lateral force being accidentally applied at the tip of the folded mast, and basically developed a spilt that ran down the middle of my bolt holes. With the new tabernacle, I did glass the lower part of the back of the tabernacle, though not for strength or durablility, but on the loose theory that maybe it would help prevent a crack/split like that from developing/propagating in the event of a moderate recurrence fo the event that took out it's predecessor. I haven't applied any engineering thought to whether that makes any sense, just had some glass and slapped it on when I was encapsulating the tabernacle with epoxy.
JonLee
 
Posts: 163
Joined: Tue Oct 19, 2010 10:02 am


Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 5 guests