Why so much fiberglass tape?

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.

Why so much fiberglass tape?

Postby doug@dougbraun.com on Wed Apr 07, 2021 9:56 pm

Hello,

I'm well underway working on the upper hull, and I realized that I have applied all the fiberglass tape that the manual mentions:
in the front compartment, at the bottom of the rear cabin wall, and between the upper and lower hull pieces. This took at most
15 yards, but the kit came with 50 yards of the stuff. So, why do they include so much? I imagine I'll apply some more on the bottom of the hull,
but there is no way I'll need more than half of it.

Doug
doug@dougbraun.com
 
Posts: 30
Joined: Fri Sep 25, 2020 2:47 pm
Location: Princeton, NJ

Re: Why so much fiberglass tape?

Postby JonLee on Sun Apr 11, 2021 1:10 pm

I had lots left over too. Since PpcketShil, I used it for seams on a Jimmy Skiff, and Tubby Tug and a Clancy. Got a few more boats worth, I figure.
JonLee
 
Posts: 172
Joined: Tue Oct 19, 2010 10:02 am


Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 2 guests