dock fender placement

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.

dock fender placement

Postby MattaOTS on Sun Jun 13, 2021 9:28 am

Hi,
I am going to keep my newly completed pocketship at a marina slip this season, and am trying to figure out how and where to mount hardware to hang fenders. I am thinking place one fender on the stern using the stern cleat. I'm also thinking to add a cleat to the very back edge of the cabin deck and hang a 2nd fender from this, although this isn't the widest section of the hull. I hesitate to drill through the water tight section of the seat back a bit further back where the hull is the widest, mostly because I couldn't reach the inside to thru bolt the cleat. Looking for suggestions from others who moor at a dock slip and what's worked for them.
MattaOTS
 
Posts: 3
Joined: Mon Jun 19, 2017 8:31 am

Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 7 guests

cron