by Hendrik on Wed Mar 25, 2009 6:54 pm
To all pump lovers:
I have given up on epoxy pumps after building 3 Kayaks and one small sailboat, they keep breaking on me.
So now, I measure the epoxy by weight on a small scale.
The procedure is:
1. place the mixing pot on the scale and zero the scale.
2. add hardener.
3. add resin at a ratio of 44g hardener : 100g Resin (Ratio is for Botecote an Australian Brand)
I Keep the scale in a plastic snap-lok bag to keep it clean.
Regards,
Hendrik