Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.
This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.
We'll try to knock down spam as quickly as possible.
I am getting ready to start glassing the top sides. Does anyone have any good pictures of where to stop each piece of cloth and where the overlaps land?
From my picture blog. This should help you see where I laided out the fiberglass on the top sides. Basically along the outside I went below the transition where the rub rail attaches. I overlapped three to four inches all fiberglass. Hope this helps.