by ddemasie on Mon Dec 18, 2017 12:31 pm
Here is what I did - See attached pictures.
Filled the seam with epoxy, and overlapped the fiberglass over the seat backs and down the sides a few inched past the seam. Sanded smooth, but not a sharp edge.
Added the rub rails at the seam line - used the seam line as my guide for getting the rub rails smooth and straight. Then when I flipped the boat over and fiberglassed the hull, I took the fiberglass all the way to the bottom of the rub rail.
- Attachments
-
- xxxy 27 17 Rub Rail Starboard First Layer.jpg (205.67 KiB) Viewed 7583 times
-
- xxxz 27 10 Fiberglass Topside - Seats 4.jpg (134.42 KiB) Viewed 7571 times
Dennis DeMasie,
Aurora, IL