PocketShip in Russia

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

UPDATE: An intermittent glitch is rejecting longtime users' attempts to log in, with a message saying the IP is banned. These users have NOT been banned; the solution is to try logging in again (several times if necessary). If that doesn't work, let us know and we will force a reactivation of your account. Thank you for your patience.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.

Re: PocketShip in Russia

Postby Dmitriy on Mon Jun 24, 2024 6:20 am

It's me again )
I have been actively working for the past time. At the end of April, I had a two-week vacation and I covered the upper part of the hull with fiberglass.
Then there was a long and tedious sanding. Now I have the upper part of the hull ready and I'm making a side rails.
The next vacation will be in the middle of July and by that time I want to turn the boat over to start fiberglassing the bottom.

When I cut the holes for the hatches, I smelled the smell of the past. I glued the deck in February 2023 and after that the hatches were sealed.

An unpleasant situation during sanding - the places of overlap of fiberglass were damaged during sanding, as they were thicker. Therefore, I re-coated some places with epoxy. But when I sand them repeatedly, sometimes the fibers peek out next to them. It's a complicated process. Therefore, I think that I will cover the upper part of the hull again with several layers of epoxy and sand it to achieve a high-quality surface.
Attachments
20240624_202754_res.jpg
20240624_202754_res.jpg (92.5 KiB) Viewed 91 times
20240624_202722_res.jpg
20240624_202722_res.jpg (79.77 KiB) Viewed 93 times
Dmitriy
 
Posts: 66
Joined: Tue Jan 18, 2022 12:19 am

Previous

Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 4 guests