Preventing Floorboards Bending Up At Ends

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.

Preventing Floorboards Bending Up At Ends

Postby Hooky on Fri Jan 20, 2023 1:54 am

If you find the floorboards bending up due to the distance from BH8 and floor 7. (These are the floorboards that are not secured by screws at the very ends. Then screw a small piece of ply to the underside end of the offending floorboard and slide it beneath the neighboring secured floorboard.
This will pull the bend down level and no more bend at the end.
See my floorboard tip on the blog! plenty of pics.
Cheers Terry from down under.

https://hookypocketship.blogspot.com/
Hooky
 
Posts: 76
Joined: Sat Apr 30, 2016 5:49 am
Location: Australia

Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 29 guests

cron