Hatch cover plans?

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.

Hatch cover plans?

Postby Robblackburn on Fri Apr 14, 2023 10:45 pm

Hello,

I have been lurking here for a while but have finally taken delivery of a lovely Pocketship called Kermadec from Tasmania in Australia. I got her home yesterday and have been having a look at the whole thing today with a mate. Beautifully built by Peter Kreb. Faultless everywhere I look

My question to the group is that the hatch cover around the hatch slide has a few weathering issues and I don't have a set of plans for the boat. I have bought a copy of the building manual but as the boat was built from a kit I don't think Peter got a set of plans.

Is there anyway I can get hold of the plans for the bits and pieces that make up the hatch cover without buying the whole lot?

Rob Blackburn
Robblackburn
 
Posts: 3
Joined: Sat Jan 28, 2023 3:47 pm

Re: Hatch cover plans?

Postby Tom G on Tue Apr 18, 2023 9:21 pm

Hey Rob, I don't know what part you are trying to repair exactly but I have attached a photo of portion of plan page 10 that shows some detail. My Pocketship was built by someone else and I needed to fix quite a few builder errors that made the boat unusable but I did have the plan set that came with the boat.

If that is not it you might try asking CLC for help with a drawing. When needed to fix some errors made by original builder they were a big help. I got a pdf of the tabernacle for example and later a pdf showing where bow eye should be located. They will likely help you Tom
Attachments
companion slide.jpg
companion slide.jpg (69.78 KiB) Viewed 3506 times
Tom G
 
Posts: 21
Joined: Tue Dec 04, 2018 2:25 pm

Re: Hatch cover plans?

Postby Hooky on Fri Apr 21, 2023 4:42 am

Rob,
I sent you a PM on the "User Control Panel."
give me a call.
Cheers mate Terry
Hooky
 
Posts: 80
Joined: Sat Apr 30, 2016 5:49 am
Location: Australia

Re: Hatch cover plans?

Postby Robblackburn on Sat Apr 22, 2023 4:18 pm

Thanks for that. Have got it back to bare wood and it is drying out nicely so reckon I am ok and won't have to rebuild. Will epoxy and glass in a few days. Is drying quickly actually.

Rob
Robblackburn
 
Posts: 3
Joined: Sat Jan 28, 2023 3:47 pm


Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 7 guests