Running electric cable up mast

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

UPDATE: An intermittent glitch is rejecting longtime users' attempts to log in, with a message saying the IP is banned. These users have NOT been banned; the solution is to try logging in again (several times if necessary). If that doesn't work, let us know and we will force a reactivation of your account. Thank you for your patience.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.

Running electric cable up mast

Postby slash2 on Thu Mar 21, 2024 9:23 am

I've searched the forum but don't see much on this.

I need to power a nav light at the masthead. I think I'm going to run an NMEA 2000 drop cable in case I eventually add a wind sensor at some point. Besides, the cables are premade and have watertight connectors; just seems like an easy solution. Now, I guess I could use a battery powered light and, eventually a wireless wind sensor, but I want to explore the cable option.

Anyway. I need to route the cable, and no, I did not plan ahead and run it up the inside of the mast. Looking around online, I've seen a couple of ideas. One is to route a groove up the mast, install the cable, then cover it. I don't like that as I think it would compromise the mast structure. Another is to run it up a shroud. This seems ok, but I think it would be unsightly and I can't think of a good way to attach the cable to the shrouds other than tape. Also running the cable from the chainplate over to the fore-deck looks a bit tricky. (I want to run the cable there as I will have solar cables going through the deck as well). The third way would be to just run it up the outside of mast, if I can find a route that avoids all the lines. I'm also not sure what the best, least obvious, attachment method would be.

I image others here have solved this problem, so what worked?
Steve Sawtelle
slash2
 
Posts: 173
Joined: Fri Jul 09, 2021 2:27 am

Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 3 guests