PocketShip.net

For sailors and boatbuilders interested in PocketShip

Skip to content

Building spars

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

UPDATE: An intermittent glitch is rejecting longtime users' attempts to log in, with a message saying the IP is banned. These users have NOT been banned; the solution is to try logging in again (several times if necessary). If that doesn't work, let us know and we will force a reactivation of your account. Thank you for your patience.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.
Post a reply

Building spars

Postby Dmksails on Mon Aug 12, 2024 7:55 pm

Starting my build with the spars. I will be using douglas fir and I'm starting wit the bowsprit and will need to build it up from two pieces. Question - do I want the seam to be horizontal or vertical? Which would be stronger?
Dmksails
 
Posts: 20
Joined: Sat May 25, 2024 2:21 pm
Top

Re: Building spars

Postby [email protected] on Tue Aug 13, 2024 10:43 am

For what it's worth, the stock bowsprit has a vertical seam. But I doubt that strength is the main issue - it is probably based on the size of the timber that was available.
[email protected]
 
Posts: 205
Joined: Fri Sep 25, 2020 2:47 pm
Location: Princeton, NJ
Top

Re: Building spars

Postby Hooky on Wed Aug 14, 2024 3:53 am

Laminated vertically would be stronger, but as Doug said it may be determined by your timber stock sizes.
I laminated mine vertically, check out the April 2024 post on my Blog
Bowsprit.jpg
Bowsprit.jpg (87.23 KiB) Viewed 1388 times

Cheers Terry
https://hookypocketship.blogspot.com/20 ... sprit.html
Hooky
 
Posts: 100
Joined: Sat Apr 30, 2016 5:49 am
Location: Australia
Top

Re: Building spars

Postby dbeck on Wed Aug 14, 2024 3:10 pm

It’s funny: From the figures in the manual it looks like the bowsprit of PS 1 has a horizontal seam.

From the timber that came with the kit, ours was made with a vertical seam.

Dietrich
dbeck
 
Posts: 150
Joined: Fri Dec 17, 2021 2:23 pm
Top
Post a reply

Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 0 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Time : 0.019s | 14 Queries | GZIP : Off
cron