I'm preparing to build the Keel, but I'm nervous about setting the curve as mentioned on pg34 of the manual. Seems to be very easy to get this wrong based on all the comments here.
I went to the plans to look it over and came up with this idea. The Keel bottom is straight so I extended a line forward, then measured from that line up the tip of the noseblock and got 1.5 inches. At a scale of 3" = 12" that should come to 6". I should then be able to do the same when I setup the Keel. What do you think?
PocketShip.net
For sailors and boatbuilders interested in PocketShip
Setting curve for the noseblock
Moderator: John C. Harris
Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.
1 post • Page 1 of 1
Setting curve for the noseblock
by Dmksails on Mon Oct 07, 2024 11:50 am
- Attachments
-
- IMG_8729.jpg (69.78 KiB) Viewed 109 times
- Dmksails
- Posts: 20
- Joined: Sat May 25, 2024 2:21 pm
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests