Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.
For more information on PocketShip, click here: http://www.clcboats.com/pocketship
This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.
We'll try to knock down spam as quickly as possible.
UPDATE: An intermittent glitch is rejecting longtime users' attempts to log in, with a message saying the IP is banned. These users have NOT been banned; the solution is to try logging in again (several times if necessary). If that doesn't work, let us know and we will force a reactivation of your account. Thank you for your patience.
Moderator: John C. Harris
by Dmksails on Sat Feb 15, 2025 6:43 pm
I'm using western cedar for my cabin floor. I had a number of pretty nice planks that I was able to mill down to usable boards. Here is the port side roughed in. Board dimensions I'm using are 3/4 by 2-1/2. Fun to be working with wood instead of epoxy for a change!

- cabin floor 1.jpg (134.39 KiB) Viewed 30945 times
Dave
https://salishseapocketship.blogspot.com/
-
Dmksails
-
- Posts: 54
- Joined: Sat May 25, 2024 2:21 pm
Return to PocketShip Forum
Who is online
Users browsing this forum: No registered users and 26 guests