PocketShip.net

For sailors and boatbuilders interested in PocketShip

Skip to content

Wiring the side panels - bow to stern?

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

UPDATE: An intermittent glitch is rejecting longtime users' attempts to log in, with a message saying the IP is banned. These users have NOT been banned; the solution is to try logging in again (several times if necessary). If that doesn't work, let us know and we will force a reactivation of your account. Thank you for your patience.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.
Post a reply

Wiring the side panels - bow to stern?

Postby Dmksails on Sun Mar 09, 2025 6:49 pm

I'm getting ready to wire in the side panels. The manual says to wire this is from the stern to the bow. I also see that alot of builds have had issues with the panels meeting in the bow.

Has anyone tried wiring these panels starting at the bow? I'm wondering if that might work better.
Dmksails
 
Posts: 54
Joined: Sat May 25, 2024 2:21 pm
Top

Re: Wiring the side panels - bow to stern?

Postby Pasi in Finland on Mon Mar 10, 2025 7:19 am

I ended up starting at the bow. It was really difficult to get the panels to meet there if starting anywhere else.

Was not an issue and everything went well. I think I loosely supported them about midway first though.

Pasi
Pasi in Finland
 
Posts: 43
Joined: Mon Dec 07, 2020 7:37 am
Top

Re: Wiring the side panels - bow to stern?

Postby Creekboater on Mon Mar 10, 2025 1:20 pm

I was one of those that could never get the side/bottom panels to meet at the bow. Wound up with a quarter inch gap that I just filled with epoxy.

It shouldn't hurt anything to TRY and start at the bow. Just waste some wires at most. Go for it!
http://sisterspocketship.com
* Jimmy Skiff II
* amateur for sure (builder/sailor)
* impossible to insult my intelligence
Creekboater
 
Posts: 139
Joined: Sat Nov 13, 2021 6:58 pm
Top
Post a reply

Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 28 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Time : 0.062s | 11 Queries | GZIP : Off