PocketShip.net

For sailors and boatbuilders interested in PocketShip

Skip to content

Sea Hood Solar Panel

Welcome to PocketShip.net! This bulletin board is for builders of the Chesapeake Light Craft-John C. Harris "PocketShip" design, a 15-foot micro cruiser sailboat built from a kit or plans.

For more information on PocketShip, click here: http://www.clcboats.com/pocketship

This site gathers PocketShip builders in one place. Here you can share photos, tips, questions, and---eventually---your sailing adventures in PocketShip! CLC will also post design updates and tips here as they come up.

We'll try to knock down spam as quickly as possible.

UPDATE: An intermittent glitch is rejecting longtime users' attempts to log in, with a message saying the IP is banned. These users have NOT been banned; the solution is to try logging in again (several times if necessary). If that doesn't work, let us know and we will force a reactivation of your account. Thank you for your patience.

Moderator: John C. Harris

Forum rules
Spam or commercial posts will be deleted.
This is a civil forum: no flames or drunken tirades.
Please stay on-topic.
PocketShip's Web Page: http://www.clcboats.com/pocketship
If you need CLC customer service: http://www.clcboats.com/forms/contact_us.html
We'll try to delete spam as soon as it appears.
Post a reply

Sea Hood Solar Panel

Postby Hooky on Mon Sep 29, 2025 6:03 am

IMG_3733.JPG
IMG_3733.JPG (145.83 KiB) Viewed 782 times
The local Marine store had solar panels on sale. I really wanted to install a flexible panel but found it difficult to get one that would fit neatly on the sea hood. The panel I chose was a solid aluminum framed panel.
It was a 12V, 40W Monocrystalline Panel with 4mm (MC4) PV Connectors.
It measured 664mm Length x 408mm width x 25mm height which fitted nicely on top of the sea hood.
I intend to connect it through a DCC charger with a built in MPPS solar regulator.
To fix the straight panel to the curved sea hood top I pop riveted 2 x 90-degree aluminum angles together as shown in the pic and screwed them to the underside of the panel.
The bases of the angles were bent to conform to the sea hood.
I still have to glass the sea hood top before securing the panel; I will add to this post when completed.
Check out my blog
https://hookypocketship.blogspot.com
Cheers terry from down under.
Hooky
 
Posts: 112
Joined: Sat Apr 30, 2016 5:49 am
Location: Australia
Top
Post a reply

Return to PocketShip Forum

Who is online

Users browsing this forum: No registered users and 216 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Time : 0.116s | 12 Queries | GZIP : Off